Description• Beautiful design and aesthetic appearance. • High efficiency and cost-effectiveness. • Low noise during operation. • The chimney does not require natural traction, it is possible to use a coaxial chimney from wall-mounted boilers. • DHW heat exchanger made of stainless steel. • For the GA series, the boiler body (main heat exchanger) is made of heat-resistant steel. • Remote room remote control. • The possibility of replacing the burner with a liquid fuel one. • Long service life and ease of maintenance. RATIONAL DESIGN: Due to its small size and low weight, the boiler is convenient to transport, easy to install and allows rational use of the room area. For ease of installation, the connecting pipes are located on both sides of the boiler, which greatly simplifies the strapping and installation of the boiler. STABLE FROST PROTECTION SYSTEM: When the room temperature drops, the freezing protection system automatically activates in the boiler. If the temperature of the heating water drops below 10 ° C, the circulation pump automatically starts, ensuring constant circulation of the coolant in the heating system. When the temperature of the heating water drops below 6 ° C, the burner automatically turns on and warms up the coolant to 21 ° C. LONG SERVICE LIFE: Thanks to the use of high-quality steels and the automated welding process of the boiler body by robots, the service life of the boiler body can reach 10 years or more with proper care and proper operation. This applies to boilers made of both heat-resistant steel and stainless steel. At the same time, the hot water circuit is made only of stainless steel in any models of gas/liquid fuel boilers. DIAGNOSTICS OF ERRORS DURING OPERATION: The boiler automation monitors the parameters of the boiler operation, in case of a failure, error codes are displayed on the remote control and on the boiler, which make it much easier to determine the cause of the boiler stop or malfunction. technical specifications heating: Output power: 23 KW/h. Efficiency: 91.5%. Rated temperature: 40~80°C. Maximum working pressure: 3.0 Kg/cm2 Max. heating area: 230 m2. OTHER PARAMETERS: Fuel type: Natural gas. Gas consumption: 2.24 m3/h. Purpose: Heating and hot water. Gas pressure (with the boiler on):100-250 mmH2O Voltage/frequency: 220/50 V/ø/Hz. Power consumption: 123 W. DIMENSIONS: Width: 382 mm. Height: 856 mm. Length: 631 mm. Net weight: 74kg. Gas supply: 15 mm. Heating pipes/return: 25 mm. DHW pipes: 15 mm. Chimney diameter: 75 ø mm. Exhaust temperature: less than 250°C.more hide
