Description• Good appearance and high build quality. • DHW heat exchanger made of stainless steel. • Boiler body (main heat exchanger) made of heat-resistant steel (GPD series). • High efficiency. • High reliability and structural strength. • Remote room remote control. • A complex of protective automation (low water level, protection against freezing, overheating, in case of gas interruptions, self-diagnosis in case of malfunction). • Easy to install and maintain. HIGH QUALITY AND SAFETY: Boilers have protection against low water levels, fuel supply interruptions, lack of exhaust gas traction, overheating and protection against freezing of water in the boiler. The build quality and appearance are the best in Korea.No risk of rusting in the places of welds due to special agronomic welding performed using a computerized robot. The GTD series is made entirely of stainless steel, which significantly reduced the weight of the boilers, ease of transportation and installation, while the durability of the boiler has been proven by many years of operation. The GPD series is made of heat-resistant high-quality steel. The production of boilers of such power from stainless steel is very expensive. However, in terms of service life and other technical characteristics, these boilers are not inferior to any other boilers and are distinguished by simplicity, reliability, excellent price. VERSATILITY: These boilers can, if necessary, be converted to liquid diesel fuel when replacing the burner and boiler automation. EASE OF INSTALLATION AND OPERATION: The boilers are equipped with a special frame for convenient transportation and installation. The supply of heating pipes can be done from either side. Forced exhaust allows, if necessary, to do without an atmospheric high chimney. HIGH EFFICIENCY: The boiler design ensures high efficiency. The burner is very reliable with proper care and proper operation, components from the world's best manufacturers (HONEYWELL, DUNGS, etc.) are installed in the design. DIAGNOSTICS OF ERRORS DURING OPERATION: The boiler automation monitors the parameters of the boiler operation, in case of a failure, error codes are displayed on the remote control and on the boiler, which make it much easier to determine the cause of the boiler stop or malfunction. technical specifications heating: Output power: 81.3 KW/h. Efficiency: 92.8%. Rated temperature: 40~80°C. Maximum working pressure: 3.0 Kg/cm2 Max. heating area (approximately!): 500~800 m2. HOUSEHOLD HOT WATER: Output power: 232.6 KW/h. Performance at ∆t=40°C: 29 ℓ/min. Maximum temperature: 80 °C Minimum operating pressure: 0.3 Kg/cm2. OTHER PARAMETERS: Gas consumption: 8 m3/h. Gas pressure (with the boiler on): 100-250 mmH2O Voltage/frequency: 220/50V/ø/Hz. Power consumption: 188 W. DIMENSIONS: Width: 547 mm. Height: 1240 mm. Length: 837 mm. Net weight: 110 kg. Gas supply: 15 mm. Heating pipes/return : 40 mm. DHW pipes: 20 mm. Chimney diameter: 148 ø mm. Exhaust temperature: less than 250°C.more hide
